 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| New Product M30L40C Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier FEATURES TO-220AB * Guardring for overvoltage protection * Lower power losses, high efficiency * Low forward voltage drop * High forward surge capability 3 2 1 * High frequency operation * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection applications. PIN 1 PIN 3 PIN 2 CASE PRIMARY CHARACTERISTICS IF(AV) VRRM EAS IFSM VF at IF = 15 A TJ max. 2 x 15 A 40 V 20 mJ 280 A 0.413 V 150 C MECHANICAL DATA Case: TO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse current per diode at tp = 2 s, 1 kHz Non-repetitive avalanche energy at 25 C, IAS = 2 A, L = 10 mH per diode Voltage rate of change (rated VR) Operating junction and storage temperature range total device per diode SYMBOL VRRM IF(AV) IFSM IRRM EAS dV/dt TJ, TSTG M30L40C 40 30 15 280 1.0 20 10 000 - 65 to + 150 UNIT V A A A mJ V/s C www.vishay.com 430 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89012 Revision: 27-Aug-08 New Product M30L40C Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 8 A IF = 15 A IF = 30 A IF = 8 A IF = 15 A IF = 30 A Reverse current per diode (2) Typical junction capacitance per diode VR = 40 V 4.0 V, 1 MHz TJ = 25 C VF TJ = 125 C TJ = 25 C TJ = 100 C SYMBOL TYP. 0.430 0.490 0.595 0.331 0.413 0.572 88 12 750 MAX. 0.55 V 0.48 360 45 A mA pF UNIT Instantaneous forward voltage per diode (1) IR CJ Notes: (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL RJC M30L40C 2.0 UNIT C/W ORDERING INFORMATION (Example) PREFERRED P/N M30L40C-E3/4W UNIT WEIGHT (g) 2.068 PREFERRED PACKAGE CODE 4W BASE QUANTITY 50/tube DELIVERY MODE Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 35 Resistive or Inductive Load 9 8 D = 0.2 D = 0.1 D = 1.0 D = 0.3 D = 0.8 D = 0.5 Average Forward Current (A) 30 Average Power Loss (W) 7 6 5 4 3 2 1 0 25 20 15 10 5 0 0 25 50 75 100 125 150 T D = tp/T 0 2 4 6 8 10 12 14 tp 16 18 Case Temperature (C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode Document Number: 89012 Revision: 27-Aug-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 431 New Product M30L40C Vishay General Semiconductor 100 10 000 TJ = 150 C TJ = 125 C Instantaneous Forward Current (A) 10 TJ = 100 C Junction Capacitance (pF) 0.8 1000 TJ = 25 C 1 0.1 0 0.2 0.4 0.6 100 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 1000 10 Transient Thermal Impedance (C/W) Instantaneous Reverse Current (mA) Junction to Case TJ = 150 C 100 TJ = 125 C 10 TJ = 100 C 1 1 0.1 TJ = 25 C 0.01 10 20 30 40 50 60 70 80 90 100 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 3 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) PIN 2 www.vishay.com 432 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89012 Revision: 27-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of M30L40C-E34W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |